Why Seal Your Driveway in Mandurah?
Concrete is porous — like a hard sponge. In Mandurah, unsealed Exposed Aggregate and Liquid Limestone absorbs engine oil, bore water, and red wine instantly.
The Problem: Once these contaminants soak in, they are nearly impossible to remove. The damp pores also become the perfect breeding ground for black mould roots — very common in Mandurah's humid coastal conditions.
The Solution: We apply a commercial-grade sealer (Acrylic or Penetrating) that fills the pores of the stone, creating a tough, invisible barrier against the elements — protecting your driveway for up to 3 years.
- ✓ Stops oil and grease from soaking in
- ✓ Prevents black mould from growing back
- ✓ Enhances the colour of the stone (Wet Look finish)
- ✓ Locks sand in paver joints to stop weeds
- ✓ 3-year warranty available on all sealing work
Exposed Aggregate, Liquid Limestone & Paver Sealing — Which Finish?
We don't use "one sealer fits all." We choose the right product for your surface.
Wet Look (High Gloss)
Best for: Exposed Aggregate & Grey Concrete.
Our most popular finish for Mandurah driveways. It darkens the stone, making the pebbles "pop" with rich colour — just like when it's wet. We add a Non-Slip Bead to ensure it's safe underfoot in the rain.
Natural (Penetrating)
Best for: Liquid Limestone & Travertine.
Perfect for pool areas where you want to keep the stone cool. Soaks deep inside — invisible to the eye — repelling red wine, BBQ grease, and water without changing the surface texture or colour.
Tinted (Colour Restore)
Best for: Old, Stained or Faded Concrete.
Is your driveway old and patchy? We can mix a custom charcoal or grey tint into the sealer to mask imperfections and give the driveway a uniform, brand-new appearance without re-laying.
⚠️ Safety First: We include a specialised Grit Additive in all gloss sealers to prevent slipping in the rain.
Our Concrete Sealing Process — Mandurah & Peel Region
We don't just roll it on. Preparation is 90% of the job.
Deep Clean
You cannot seal a dirty surface. We perform a deep chemical pressure clean to remove all dirt, oil, mould and old sealer residue. The surface must be completely clean before any product is applied.
Dry & Mask
We allow the concrete to dry completely — moisture trapped under sealer causes white spots and adhesion failure. We tape off your garage door, drains, and walls to prevent overspray.
Apply & Cure
We apply 2 coats of premium commercial-grade sealer. A Non-Slip Grit Additive is included in the final coat to ensure your driveway is safe to walk and drive on when wet.
Driveway Sealing Cost in Mandurah — What to Expect
Transparent pricing across the Peel Region. No hidden fees, no surprises.
Single Car Driveway
From $550
Standard exposed aggregate or liquid limestone driveway. Includes clean, dry, mask and 2-coat seal.
Double Car Driveway
From $850
Larger surface area. Price varies by condition and surface type. Free assessment included.
Patio / Pool Area
From $400
Liquid limestone or travertine with penetrating sealer. Keeps surfaces cool and stain-free.
Full Property Package
POA
Driveway + patio + paths sealed together. Best value — we quote the whole job in one visit.
All prices are indicative. We provide free fixed-price quotes for every job in Mandurah and the Peel Region. Get your quote here →
Concrete Sealing Across the Peel Region
We seal driveways, patios and pool surrounds across Mandurah and surrounding suburbs. Same trusted process, same warranty, every suburb.
Surfaces we seal: Exposed Aggregate • Liquid Limestone • Grey Concrete • Clay Pavers • Travertine • Stamped Concrete
Driveway Sealing FAQs — Mandurah & Peel Region
How much does driveway sealing cost in Mandurah?
Driveway sealing in Mandurah starts from $550 for a single-car exposed aggregate driveway, including the deep clean, masking and 2-coat application. Double driveways start from $850. We provide free, fixed-price quotes — call 0435 151 877.
How long does driveway sealing last in Mandurah?
Our commercial-grade sealers typically last 2–3 years on driveways with normal vehicle traffic. High-traffic areas or surfaces exposed to harsh bore water may need re-sealing closer to 2 years. We offer a 3-year warranty on qualifying jobs — ask us about eligibility when you book.
Can you seal a driveway that already has oil stains?
Yes — but the oil must be treated first. We use a chemical degreaser and hot pressure wash to lift as much oil staining as possible before sealing. Sealing over untreated oil causes adhesion failure and white patches. Deep set stains that won't fully lift can be masked with our Tinted (Colour Restore) sealer option.
Is the wet look sealer slippery when wet?
It can be without the right additive. That's why we include a Non-Slip Grit Additive in all our gloss and wet-look sealers as standard. This creates a textured micro-surface that provides grip underfoot in the rain without affecting the appearance.
How long after sealing before I can drive on my driveway?
We recommend waiting 24 hours for foot traffic and 48–72 hours before parking vehicles on the freshly sealed surface. In Mandurah's warmer months the sealer cures faster, but we always advise waiting the full time to avoid tyre marks in soft sealer.
Do you seal liquid limestone and pool surrounds?
Yes — liquid limestone sealing is one of our most popular services in Mandurah. We use a penetrating sealer that soaks into the stone without changing the appearance, repelling red wine, sunscreen, BBQ grease and chlorine. It keeps the surface cool underfoot and is safe around pools.
Do you clean the driveway before sealing?
Always. Sealing over a dirty surface is the number one cause of sealer failure. Our process always starts with a deep chemical pressure clean to remove all dirt, mould, oil and old sealer residue. The surface must be completely clean and dry before any product is applied.
Complete the Job — Clean Before You Seal
For the best sealing result, we always recommend a professional clean first.
Driveway Pressure Cleaning
Deep high-pressure clean to strip all oil, grime and mould before sealing. Step 1 of our full driveway restoration service.
Learn more →Bore Stain Removal
Iron staining must be treated before sealing. We chemically dissolve orange bore stains from driveways and pavers first.
Learn more →House Soft Washing
Bundle your driveway sealing with a full house soft wash for maximum kerb appeal and the best package pricing.
Learn more →Stop cleaning your driveway every 6 months.
Seal it once and protect it for up to 3 years. Servicing Mandurah and the Peel Region.